Language: Greek

Currency: EUR

facebook

www.turbobikekit.com

Καλάθι Αγορών:

0 προϊόν(τα) - €0,00
Τα καλάθι αγορών σας είναι άδειο!

1 chainwheel kits

1 chainwheel kits

CYCLONE 1 chainwheel kit 200W, 250W, 360W, 480W, 500W, 650W,840W,960W,1200W, 12600W, 1680W  Installation

 

 

1.   Use the crank remover to remove the nut from the axle

2. Use the crank remover to remove the chain wheel and cranks

3. Use crank remover to remove the chain wheel and cranks

4. The distance between the rear wheel and the button bracket must be at least 60 mm

5.  Remove the nut from the button bracket

6.   Remove the Axle from the button bracket and replace it with the longer Axle

7. Put the motor’s mounting bracket on the bike frame

8.  Put the motor on the mounting bracket

9.  Put the chain wheel on the freewheel crank then on the Axle

10.  Add more chain on the original chain link ( approx.4 links)

11. Tighten the cranks with the crank remover

12. Put the chain over the motor’s sprocket and adjust the motor to the right height, make sure the nut is positioned in place ( CCW motor)

13. Put the chain over the motor’s sprocket and adjust the motor to the right height, make sure the nut is positioned in place ( CW motor)

14. Motor throttle on the right hand side

15. Gear grip on the left hand side

16. Plug the throttle plug in to the motor side controller plug

17. Plug in the battery power cord to the motor’s power cord

18. Complete and enjoy the best Cyclone electric bike kit - your new toy

END. Do not forget to reSphinx  in the best Cyclone all the screws, freewheel bolts and Bottom bracket after every 5-8km distances (2 times)